Сверлильный станок без ЧПУ, Вертикальный, Новый, В наличии

Flexi Roc D60/D65 For Sales
Condition: New, 2025
Available: Spare parts for Flexi Roc D60/D65 For Sales

Main components:
Drilling hole diameters (recommended):
● Ergonomic cab
● Aluminum feeder boom
● Disassembly table with pressure control
● Turbocharged diesel engine
● Atlas Copco compressor
● COP 44 Gold, COP 54 Gold, COP 64 Gold, COP 66:
● (110-203 mm)
● Max. drilling depth with hydraulic boom extension and boom system: 5 m
Rod diameter, mm:
● 89-114 mm - 45
● 127-140 mm - 25
Compressor:
● Two-stage screw compressor - Atlas Copco ORX 12
● Working pressure, max. - 30 bar
Dust collector:
● Filtration area - 32 m2
● Suction capacity at 500 mm w.c. - 1,270 l/s
● Thickness of the suction hose: 203 mm (1.4 in.)
● Cleaning air pressure - 2-4 litres/imp
● Number of filter elements – 32
Electrical system:
● Voltage - 24V
● Batteries - 2x12 V, 235 Ah
● Generator - 28 V, 95 Ah
● Work lamps, front - 4x70 W
● Work lamps, rear - 2x70 W
● Working lamps, feeder - 2х70 W
● Warning lamp and reverse signal buzzer
Engine:
● Caterpillar CAT C15 turbocharged diesel engine
● Tier 3/Stage IIIA
● Rated power at 1800 rpm. - 540 hp / 403 kW
Interior:
● Rear view cameras
Allows the operator to increase speed and positioning accuracy, as well as maximize safety in confined areas, thereby increasing productivity
● Combination of reversing camera and light. On the lower corner of the cab on the operator side, as well as the relocation of the right-hand reversing mirror to the best peripheral area makes maneuvering easier and increases safety.
● The use of an increased and at the same time sufficient level of cab lighting allows the operator not to be overworked, which has a positive effect on productivity (map writing light).
2. RC kit option
The system is compatible with drill rigs: FlexiR0C D60/D65, Nitrox 60/65. This sampling system is intended for collecting drilling mud (cuttings samples) and its further dividing into packing.
Components of the set: Separator with the rotating
dispenser:
● Mounting bracket
● It is welded to the frame of the drill rig under the operator's cabin and is designed for attaching the hydroficated console to it.
● Hydroficated, console
● Provides the ability to adjust the position of the sampling system for the convenience of the operator and maintenance of the drilling samples
● collecting system.
● Drilling samples collecting system
● Includes pneumatic cyclone, discharge cone,
● divider with a rotating distributor
● Equipped with inspection hatches. To provide maintenance, it can be turned over by hydraulic cylinder
● The divider with a rotating distributor spreads the material into two containers and provides that 1/8 of the material is taken into each container.
● The containers are installed opposite each other
● The sample bag is placed into the container
● The material from the spreader is poured into the sample bag.
Rod diameter, mm: Vibrators and separators
work control:
● Pneumatic cyclone
● Replaceable cone section
● Pneumatic vibrators
● Cyclone inlet and cylindrical section equipped with replaceable liners.
● Using external remote control